Maker Pro
Maker Pro

what is this port called

saiyen2002

Jun 10, 2013
2
Joined
Jun 10, 2013
Messages
2
Hello,

I have this piece of telecom equipment that I need to work with. But at the moment I do not know of the type of cable that I will need to connect to the power port.

It is a GN Nettest MPA 7200.
Can anyone help me identify the name of the cable that I would need. Picture of the equipment is attached.

Thanks
 

Attachments

  • NetTest_MPA_7200.jpg
    NetTest_MPA_7200.jpg
    136.1 KB · Views: 162

glewis721

Apr 30, 2013
49
Joined
Apr 30, 2013
Messages
49
I don't know what it's called, but it will probably be hard to find. Once you get the name, search for a cable that has the mystery connection on one end and on the other, whatever it needs to be connected to. Even if you don't have the name, they have a graphic finder where you choose what lookes like what you need on both ends of the cable, then comes up with results. You may, however, need to use a adapter or two.
Search here; they have about all types of connectors and cables:
http://www.startech.com
 
Last edited:
Top