Connect with us

What is this device? "MCL 0 322", followed by "ADT 1-1W"?

Reply to Thread

Discussion in 'General Electronics' started by Frank, Frank, Nov 24, 2005.

Nov 24, 2005 #1

Frank, Frank Guest

It has 6 legs, corn yellow, approximately 0.8mm X 0.5mm X 0.3mm,
the two rows of text are
"MCL 0 322"
"ADT 1-1W"
"."

Third row has a dot. I found two of this device on my 105MS ADC board,
while on another piece of board, somebody took off this chip. This makes me
wonder what the purpose of this chip is.

Hope you could help.

Frank
Nov 24, 2005 #2

Jeroen Belleman Guest

It has 6 legs, corn yellow, approximately 0.8mm X 0.5mm X 0.3mm,
the two rows of text are
"MCL 0 322"
"ADT 1-1W"
Click to expand...

It's a 1:1 transformer from Mini-Circuits. Look at:
http://www.minicircuits.com/dg03-236.pdf
It's the very first entry on that page.

Jeroen Belleman
Nov 28, 2005 #3

Frank Guest

Jeroen Belleman said:

It's a 1:1 transformer from Mini-Circuits. Look at:
http://www.minicircuits.com/dg03-236.pdf
It's the very first entry on that page.

Jeroen Belleman
Click to expand...

Thank you Jeroen. I think it is the correct device.

(You must log in or sign up to reply here.)

Ask a Question

Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.

Similar Threads

Loading...