Maker Pro
Maker Pro

what is the problem with this motherboard...?

F

fixpc

Jan 1, 1970
0
the motherboard is installed with intel Celeron when the reset is short ,
it wont reset at all. The reset lead has 3.29 V.


In the false loading, it does not has the 3.3 V in the reset pin.
 
F

fixpc

Jan 1, 1970
0
the circuit is traced and it was found that just it before it goes to a
southbridge there is a resistor. the oncircuit measurement of the resistor
is 9.7k. But the voltage is 3.3 V on one side and the side of the resistor
has zero voltage.

SO what is wrong here?
 
T

Tom MacIntyre

Jan 1, 1970
0
the circuit is traced and it was found that just it before it goes to a
southbridge there is a resistor. the oncircuit measurement of the resistor
is 9.7k. But the voltage is 3.3 V on one side and the side of the resistor
has zero voltage.

SO what is wrong here?

The other southbridge side of the resistor is at ground.

Tom
 
Top