Connect with us

what is the function of pin 16 in atmel(atmega128-16ac)

Discussion in 'Electronic Basics' started by [email protected], Dec 15, 2005.

Scroll to continue with content
  1. Guest

    hi
    I piezo connected to pin no. 16 in atmel(atmega128-16ac)
    microcontroller & the piezo giving going to gives alarm I want know
    what the function of pin 16 & how I can remove this alarm
    any help please
    thank you for any help
    yar
     
  2. Go to http://www.atmel.com, and consult the datasheets for that
    processor. It appears that pin 16 is an I/O pin - bit 6 of port B -
    if that is so, then it gives an alarm because the program makes it
    give an alarm for some reason - you'd have to ask the person who wrote
    the program for more information.




    --
    Peter Bennett, VE7CEI
    peterbb4 (at) interchange.ubc.ca
    new newsgroup users info : http://vancouver-webpages.com/nnq
    GPS and NMEA info: http://vancouver-webpages.com/peter
    Vancouver Power Squadron: http://vancouver.powersquadron.ca
     
  3. Pooh Bear

    Pooh Bear Guest

    Why do the hopeless jerks almost always post using Google ?

    Dear Yar,

    I suggest you 'get a clue' by reading the data sheet and learning
    something about how electronics works.

    Graham
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-