Connect with us

Weller 921Z soldering station

Discussion in 'General Electronics Discussion' started by vette54, Apr 8, 2015.

Scroll to continue with content
  1. vette54

    vette54

    4
    0
    Apr 8, 2015
    I'm having trouble finding a replacement tip for the iron on my Weller 921Z. I believe the 921Z is obsolete, but there must be a source of supply for the tips. There is no model number on the detachable iron. Sure would like to know where or if, tips might be available
    Thanks,
    vette54
     
  2. KTW

    KTW

    273
    15
    Feb 22, 2015
    Do you have a good picture of the tip you need?
     
  3. vette54

    vette54

    4
    0
    Apr 8, 2015
    Not sure how good this pix may be, but this is the best I was able to come up with. It has a number U9016 stamped on it in the blue area.
    Thanks for the speedy response
    Dave Weller tip U9016.JPG
     
  4. KTW

    KTW

    273
    15
    Feb 22, 2015
    What holds it in place, a set screw?
     
  5. vette54

    vette54

    4
    0
    Apr 8, 2015
    When the knurled nut is screwed on the threads that are showing, the sleeve holds the tip in place.
    Dave
     

    Attached Files:

  6. KTW

    KTW

    273
    15
    Feb 22, 2015
    I would buy a square or round 1/4 inch copper rod, what ever size you need, the rods can be bought in 12 inch or longer lengths, cut to length and file or grind the shape to match the original.
    These rods are usually under $10 and you'll likely be able to make more than one in about a half hour.
     
  7. vette54

    vette54

    4
    0
    Apr 8, 2015
    Great idea! I'll give it a try!
    Thanks
    Dave
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-