Connect with us


Discussion in 'Electronic Basics' started by telmospts, Nov 7, 2009.

Scroll to continue with content
  1. telmospts

    telmospts Guest

    I `m trying to draw a power source.
    Do I have to weld with electricity tools?
    Aren`t any specific tools for electronics?

    Best regards,
  2. Jamie

    Jamie Guest

    Blow torch ?

    Don't need electricity for that, just a flint
  3. Rich Webb

    Rich Webb Guest

  4. Jamie

    Jamie Guest

    Troll? You don't know the meaning of the word.

    Just like you don't know about a lot of crap that
    comes out of your mouth.

    Yes, that's you, talk about shit you no absolutely
    nothing about, rank down others to make yourself look

    Keep it, the rest here one day will see the light
    when the smoke screen you put up finally clears.

    After all, this is the best place to portray yourself as
    something you're not.

    Oh don't worry, you're not alone. There are a few others
    here hiding behind a glass wall, trying to keep the
    smoke screen in control.

    Its to bad that idiots like yourself, have to badger those
    that actually have some value here.

    Good day and thanks for contributing to idiots of Usenet.
  5. krw

    krw Guest

    Ok, so you're just another out-of-the-closet idiot.
    Says someone who's demonstrated that his knowledge of *anything* is
    No, "Jamie" that's what you do every time you take fingers to
    keyboard. Want to go over GFCIs again?
    ....and "Jamie" will be gone...
    He's not you, that is certainly true.
    The only smoke here is from your drugs, Jamie.
    You've proven your worthlessness, Jamie. There is no need to
    God day to you ,too ,dumbshit.
  6. Tom Biasi

    Tom Biasi Guest

    Explain what you want to weld.
    Do you perhaps mean soldering?
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day