Connect with us

Webcam Question

Discussion in 'Beginner Electronics' started by mike & jim, Aug 8, 2009.

Scroll to continue with content
  1. mike & jim

    mike & jim Guest

    I have used a "retired" Panasonic VHS camcorder for many years for our
    web cam link. (see below) Unfortunately the cam was fried by lightning
    a while back. After looking at several pawn shops I found a couple of
    JVC brand cams to replace the broken Panasonic. However, I am unable to
    figure out how to remove the sp, no tape, mag power, etc .... displays
    that now appear in the pic. On the panasonic it was just a matter of
    holding down the reverse & display buttons & the displays would go away.
    Have tried various ways, but no results. Any suggestions out there ?
    Thanks, Mike

    Mike & Jim's RIVERCAM
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day