Connect with us

Watertight boxes

Discussion in 'Misc Electronics' started by [email protected], Jun 12, 2008.

Scroll to continue with content
  1. Guest

    I'm looking for a cheap watertight box about 10" long by 3.5" wide by
    2.5" tall. I can't seem to find anything via DigiKey or Mouser. Does
    anyone have any suggestions? I don't care what material it is, cost
    is the main factor. $30 or less would be great.

    Thank you-
  2. Rich Webb

    Rich Webb Guest

    Hammond has several nice lines

    Search on "nema enclosure" and "ip enclosure" for others.
  3. Sjouke Burry

    Sjouke Burry Guest

    Any ordinary box,filled up with epoxy after the electronics
    have been completed??
  4. Eeyore

    Eeyore Guest

    Look up 'IP ratings'.

  5. JeffM

    JeffM Guest

  6. Long and Thin boxes are a bit thin on the ground.
    A while ago I needed one to go in a lighting column & the only thing I found was a diecast one from
    Rolec in their AluKOM range :

    They also do some aimed at things like crane pendant controls which are in a long-thin format
    (conTrol range)
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day