Connect with us

washing machine motor

Discussion in 'Electronic Repair' started by spayce, Jan 21, 2005.

Scroll to continue with content
  1. spayce

    spayce Guest

    it has a capacitor start and a high and low speed,it seems to not hav
    that extra boost on start up.i am trying to get my scanner going t
    post the diagram.what should the output reading be from the capacito
    to motor because i am getting just 120volt should it be more? thank
    mik
     
  2. NSM

    NSM Guest

    You can't imply much from the voltage readings. The problem is you don't
    know what the phase angles are. I'd measure the currents going to the motor
    and through the capacitor.

    N
     
  3. James Sweet

    James Sweet Guest


    That won't tell you anything, you need a different phase to the starting
    winding to get the motor going and you can't measure phase difference with a
    multimeter. Check the timer mechanism for burned contacts, and check the
    starting switch on the motor, messing with the capacitor you're just wasting
    your time.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-