Connect with us

warning in synplify

Discussion in 'Electronic Design' started by marcosB, Dec 22, 2005.

Scroll to continue with content
  1. marcosB

    marcosB Guest

    Hi everybody,

    I like know, what means three warning when I synthetize. If you can help
    me, you can send me a e-mail. thank you everybody.

    42:49:42:49|Pruning Register i_enc_high(8 downto 0)

    53:4:53:5All reachable assignments to i_bitlen(0) assign '0', register
    removed by optimization

    42:49:42:49|Optimizing register bit pixel_cmpr(0) to a constant 0

    28:9:28:16|Input low_part is unused
     
  2. Paul Burke

    Paul Burke Guest

    marcosB wrote:
    42:49:42:49|Pruning Register i_enc_high(8 downto 0)

    It never changes, it's always 0, it's been optimised away. Whatever was
    supposed to set it doesn't.

    Paul Burke
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-