Maker Pro
Maker Pro

Wanted: Wanted old pentium III

Status
Not open for further replies.

davelectronic

Dec 13, 2010
1,087
Joined
Dec 13, 2010
Messages
1,087
Hi to all. My second post looking for the same item. I am looking for a Pentium III desk top pc, what i want it for is testing some modded hardware, this is so i dont damage my other machines, and the pc i am looking for is a test machine. Ok what i was looking for is a Compaq ENS or EN, minimum of a pentium III and a CPU of at least 500mhz or faster, at least 128mb of system Ram, a HDD of 20GB or not less than 10GB, a CD Rom, and floppy drive. OS not necessary. I will pay £100 for a good unit. Dave.
 

Ian

Administrator
Aug 23, 2006
1,486
Joined
Aug 23, 2006
Messages
1,486

davelectronic

Dec 13, 2010
1,087
Joined
Dec 13, 2010
Messages
1,087
Hi Ian.
Thanks for looking up those links.
Ive had the IBM as a P4 and the HP as a P4 D700 or something like that.
Both about 2.5 GHZ.

Thanks again, i will keep looking, what i am after as a P3 500 MHZ or faster.
Dave. :)


index.jpg
 
Last edited:

davelectronic

Dec 13, 2010
1,087
Joined
Dec 13, 2010
Messages
1,087
Still looking for a Compaq ENS 500 MHz or faster, come on some one must have one of these old machines knocking around, ram and hdd size is not a problem, so long as it runs and its clean, ie not battered up. :)
 

northrivergeek

Jan 26, 2012
8
Joined
Jan 26, 2012
Messages
8
Man if I was closer to you I would load u up .. all u want lol .. Have you tried thrift stores.. etc .. not sure what they call em in the UK .. some sort of craigslist classifieds.
Maybe us American chaps just have too much excess lol
 

davelectronic

Dec 13, 2010
1,087
Joined
Dec 13, 2010
Messages
1,087
Interesting, no over here in the UK we have charity shops indoor markets junk shops etc, still looking £ 100 should well cover the spec i am looking for, i am on a P4 3.2 GHZ CPU HT now 3 GB Ram 160 HDD cost me £ 60 ok second user old office machine, but my search for the elusive Compaq ENS goes on, times are hard in the UK well and other countrys, thought some one would have ripped my hand off for that price.

Cant be anyone on the site with one knocking around, well not near me anyway. :)
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
Dave, See if you have a freecycle group in your area.

It's amazing what you can get free :)
 
Status
Not open for further replies.
Top