Connect with us

VR sensors and shared earths

Discussion in 'Beginner Electronics' started by Coyoteboy, Jan 30, 2007.

Scroll to continue with content
  1. Coyoteboy

    Coyoteboy Guest

    hi all,

    Assuming I have 3 variable reluctance sensors monitoring teeth on a wheel
    and I'm not using 2 of them, but they all share an -ve lead, will I have
    crosstalk issues a) In a perfect world with the earth properly grounded b)
    if I have a fault with an earth somewhere.

    Cheers
     
  2. PeterD

    PeterD Guest

    Most VR sensors are balanced and they would not be interconnected.

    In many ways this is a try it and see situation...
     
  3. Coyoteboy

    Coyoteboy Guest

    PeterD mumbled incoherently to the rest of alt.electronics:
    These are built-in sensors on a distributor but I think its going to be
    worth a try when i can figure out how to get it apart!
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-