Connect with us

Volvo tach shows reading when engine is off

Discussion in 'Boat Electronics' started by Paul L, Jul 27, 2005.

Scroll to continue with content
  1. Paul L

    Paul L Guest

    My tack now jumps to 2500 RPM when I turn the ignition on without the
    engine running. I checked the grounds and the wiring, all looks OK. How
    do I tell if the tach is bad or is it in the wiring? The input to the
    tach (gray) wire seems to have about 1.2 v on it when I turn the
    eignition on. Whne the engine starts the tach maxs out. Anyone know any
    tests I can make to narrow the problem done?

    Paul
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-