Maker Pro
Maker Pro

Voltage follower needs solving

ed5bradley

Jan 23, 2010
2
Joined
Jan 23, 2010
Messages
2
hello,
It is an voltage follower Op Amp...
I need to get under 5V for the V.out and also under 10mA for the I.out

What i have is a 10k thermistor and i need to know what the value of the other resistor should be, and what it looks like drawn up

take a look at the pic i attached
 

Attachments

  • Voltage follower.jpg
    Voltage follower.jpg
    10.1 KB · Views: 180

alex88

Jan 20, 2010
8
Joined
Jan 20, 2010
Messages
8
I might be very wrong. Iout is only determined by the op-amp ,nothing with R1.
To determine the Vout range, you need find out the temperature test range, then work out the maximum and minum resistance value of the thermister.
 
Top