Connect with us

voltage drop ?

Reply to Thread

Discussion in 'Electrical Engineering' started by A C, Dec 17, 2005.

Scroll to continue with content
  1. Dec 17, 2005 #1
    A C

    A C Guest

    can VD actually be measured at the end of a
    circuit while the amp load is on?Using a DMM.
    Is this a accurate way to measure for voltage drop?thankyou
     
  2. Dec 17, 2005 #2
    Don Kelly

    Don Kelly Guest

    You can measure the voltage at each end of the loaded circuit and find the
    difference.
    Measuring at no load would be meaningless.
     
  3. Dec 18, 2005 #3
    Don Kelly

    Don Kelly Guest

     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Voltage Drop

  2. Voltage Drop

  3. Voltage drop

  4. Voltage drop

  5. voltage drop

  6. voltage drop

  7. Voltage Drop

  8. No voltage drop

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-