Connect with us

Voltage and Current Controlled Relay Modules

Discussion in 'Electrical Engineering' started by Brian Clark, Jul 7, 2005.

Scroll to continue with content
  1. Brian Clark

    Brian Clark Guest

    Voltage and Current Controlled Relay Modules

    We have some 2-20V and 50-500V Voltage Controlled Relays and 50 - 500mA
    Current Controlled Relays available that have a standard 11-pin base
    (for use in monitoring applications).

    Also available are some replacement units for Landis & Gyr SEM35.1
    Compressor Monitors. They ensure the compressor heater circuit is
    drawing current and give an alarm signal if not. A few engineers have
    asked if we could make these as apparently they are no longer in
    manufacture?

    If you have a need for the above there are more details on www.clayzer.com
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-