Connect with us

Volt Amp Turn Relationship

Discussion in 'Electronic Basics' started by Randy Gross, Apr 23, 2004.

Scroll to continue with content
  1. Randy Gross

    Randy Gross Guest

    Greetings,

    I'm having a little trouble developing a power supply to deliver 14 vac
    @ 10 amps. I modified a MOT to deliver 14 volts but, the primary (5
    amps) and secondary (41 amp) amperages are so high, I had to put a large
    Iron cored inductor in series with the sec. to reduce the 41 amps down
    to 10. The power supply dwarfs the original design perimeter. I need to
    design a tranny to deliver what I need in a smaller package. What I need
    to determine is the primary to secondary turns and core size to deliver
    14 vac @ 10 amps.

    I have formulas for determining/modifying the volt amps in an existing
    design and, I understand these. What I don't know is how to target a
    specific set of values and how the core is used to achieve them. If you
    know of a source of information, please direct me.

    I realize I could find and purchase a supply to fit this need but, what
    would I learn?

    Randy
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-