Connect with us

voice controlled motor

Discussion in 'Electronic Design' started by [email protected], Oct 9, 2007.

Scroll to continue with content
  1. Guest

    can u pls provide me with the ckt of voice controlled motor .
    the speed of motor varries as i increase or decrease the pitch of the
    voice , can this happen if yes pls tell how?
     
  2. D from BC

    D from BC Guest

    Sorry...Dunno..
    All that came to mind was "Clap on...Clap off" :p
    D from BC
     
  3. Sure,
    1) is it strictly frequency and not amplitude dependant?
    2) what type of motor?
    3) what is the application?
    Regards
    Ken
     
  4. Take a microphone and connect it to a motor. If you yell loud enough,
    the motor will work.

    VLV
     
  5. Rich Grise

    Rich Grise Guest

    Zero-crossing detector and stepper motor?

    Good Luck!
    Rich
     
  6. So the louder and higher the lady shrieks the
    faster the motor turns. Sounds vaguely familiar,
    any ideas on how that might be applied?
    Ken
     
  7. D from BC

    D from BC Guest

    Sex toy?

    D from BC
     
  8. John Fields

    John Fields Guest

    ---
    I like it!

    E1 E2
    / /
    .. [MIC]---[ZCD]---[ONE-SHOT]---[DRIVER]---[STEPPER]


    The one-shot is non-retriggerable with a fixed-width output.

    High Freq:
    _ _ _ _ _ _
    E1_| | | | | | | | | | | | ___
    |_| |_| |_| |_| |_| |_|


    E2_|_|_|_|_|_|_|_|_|_|_|_|_|____



    Low Freq:
    ___ ___ ___
    E1_| | | | | | ___
    |___| |___| |___|


    E2_|___|___|___|___|___|___|____
     
  9. How about a carbon mike in series with a motor?


    VLV
     
  10. John Fields

    John Fields Guest

    ---
    Sure, why not?

    Small enough motor or big enough mike and it should work.

    Only thing that might be a little iffy would be driving the mike
    hard enough to modulate, say, a 1/4HP motor...

    Big power amp and loudspeaker duck-taped to the mike?

    On second thought, if the mike's housing had a quartz window in it
    it could be used for a communications spotlight.
     
  11. Ask my dentist.

    --
    Paul Hovnanian mailto:p
    ------------------------------------------------------------------
    It's easier said than done.
    .... and if you don't believe it, try proving that it's easier done than
    said, and you'll see that it's easier said that `it's easier done than
    said' than it is done, which really proves that it's easier said than
    done.
     
  12. "Sex", maybe, that's something other people do,
    right, anyway, I saw some unusual attactments
    for reciprocating saws that was vaguely familiar.
    Voice activated motor speed control, that would
    be a great stocking stuffer for the wife this Xmas!
    Thanks
    Ken
     

  13. They have a cure for clap, in the US.


    --
    Service to my country? Been there, Done that, and I've got my DD214 to
    prove it.
    Member of DAV #85.

    Michael A. Terrell
    Central Florida
     

  14. Does anyone still manufacture carbon microphones? I haven't seen a
    new one in 20 years.


    --
    Service to my country? Been there, Done that, and I've got my DD214 to
    prove it.
    Member of DAV #85.

    Michael A. Terrell
    Central Florida
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-