Connect with us

Voice announcement module (UK)

Discussion in 'Electronic Design' started by simon, Dec 11, 2003.

  1. simon

    simon Guest

    Hello.

    I've recently designed a voice announcement system around the ISD range
    of devices. However, the client has decided that the speech quality is
    not good enough. ISD/Winbond devices have a dynamic range that is
    comparable with telephone quality.

    I'd like to re-design this system using the OKI range of devices but
    don't have the time. I'm trying to source an off-the-shelf module that I
    can record (or get recorded for me) up to 16 messages - each message
    less than 2 seconds long. The module must have an audio amp output (say
    max. 2 watts) - triggering and power requirement I'm quite flexible
    with.

    I have found one source in the UK but they are unable to furnish me with
    a suitable module until the end of January 2004.

    Can any kind soul reading this suggest alternative supplier and/or
    solutions?

    Cheers,
    Simon.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-