Connect with us

Visio logic symbols

Discussion in 'Electronic Design' started by Richard Henry, May 17, 2007.

Scroll to continue with content
  1. Does anyone know of a location from which to download simple logic
    symbol shapes for Visio (and gate, or gate, etc)?
  2. scada

    scada Guest

    I have Visio 2003, a search for gates bought it all up.
  3. I have 2003, Standard Version. I don't see any place to search for
  4. Hawker

    Hawker Guest

    I'm still running visio 2000, but those shape are build in already to
    the stock libraries so I assume 2003 should have them already.
    I do remember they were a pain to find though. I guess I think more like
    a schematic (PADS, OrCAD etc) person than a MS Visio person.
  5. I remember them from earlier versions available at a previous
    employer. Maybe I should ask IT for an upgrade.

    Or maybe it's just M$ following the evolutionary path of all their
    software from the BS/CS users to the MBA users.
  6. Robert Baer

    Robert Baer Guest

    Bill Gates??
  7. Robert Baer

    Robert Baer Guest

    Yes, their software *is* BS.

  8. More like a baer just shit in the Usenet woods.

    Nice job of stinking up the place, retard baer.

  9. You're just a baer assed liar, as usual.
  10. joseph2k

    joseph2k Guest

    Nothing personal, but why use an inadequate tool to do what LTSpice does
    quickly easily and natively, and best of all, for free.
  11. Neil Steiner

    Neil Steiner Guest

    Does anyone know of a location from which to download simple logic
    Under Visio 2003 Professional, go to File -> Shapes -> Electrical
    Engineering -> Analog and Digital Logic (US Units). Not sure about
    other versions of Visio, but I believe basic gates are included in just
    about all of them.
  12. Guest

    Under Visio 2003 Professional, go to File -> Shapes -> Electrical
    This is great help, Neil, and I would like to add that if one follows your instructions and then places a "Logic Gate 2" in their drawing, they can right-click and configure the gate to appear as an AND gate, OR gate, etc., with a variable number of ports.
  13. Fred Bartoli

    Fred Bartoli Guest

    John Larkin a écrit :
    I was given a visio license a few months ago, but never got to install it.

    Is that easy enough to use, WRT the infamous word drawing tools, to
    justify the trouble of installing it?
  14. Fred Bartoli

    Fred Bartoli Guest

    Jim Thompson a écrit :
    Yes I do that too but I, from time to time, have to do crude conceptual
    mechanical drawings, flow diags, synoptics, which aren't so easy with a
    schematic tool. And the word drawing tools are just a pos.
  15. Guest

  16. Its great for flow charts.

  17. Joerg

    Joerg Guest

    Actually, most schematics CAD does this nicely. I use Eagle and create
    most of my mechanical sketches with it as well, also flow charts and
    stuff. I've got a 3D mech CAD software but for some reason I can't
    really get the hang of it.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day