Connect with us

Viewsonic PJ800 Issue

Discussion in 'Electronic Repair' started by Baffles, Apr 25, 2007.

Scroll to continue with content
  1. Baffles

    Baffles Guest

    I acquired 2 Viewsonic PJ800s, and both have the same ailment: they
    seem to display ghosts of the image. For example, green lines will
    show up multiple times (vertically, horizontal is fine).

    One projector will actually correct itself on the green ghosting/
    doubling issue if you let it run for 5-10 minutes, but it does the
    same with red, and is very icky looking.

    Any ideas?
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day