M
mrsirpantsalot
- Jan 1, 1970
- 0
hello, I have a viewsonic N2700w LCD. The power cable that runs from
the VISIONBANK board to power the LCD panel shorted out because the
protective sheath was touching some metal on the inside of the case.
I
have linked to some pictures of the problem, and if I was able to get
a replacement power cable, everything would work fine. Is this
something i could make myself? I can't seem to find it anywhere
online
(or don't know where to look). Viewsonic wants too much money to
repair the thing, when it was their fault during production for
having
the sheath of the cable pressed into a metal corner, causing the
problem. Anyhow, here's some pics... thanks for any suggestions!
-Kevin
[email protected]
http://www.thejet.net/viewsonic/cable_needed_1.jpg
http://www.thejet.net/viewsonic/cable_needed_2.jpg
http://www.thejet.net/viewsonic/cable_needed_3.jpg
http://www.thejet.net/viewsonic/cable_needed_4.jpg
the VISIONBANK board to power the LCD panel shorted out because the
protective sheath was touching some metal on the inside of the case.
I
have linked to some pictures of the problem, and if I was able to get
a replacement power cable, everything would work fine. Is this
something i could make myself? I can't seem to find it anywhere
online
(or don't know where to look). Viewsonic wants too much money to
repair the thing, when it was their fault during production for
having
the sheath of the cable pressed into a metal corner, causing the
problem. Anyhow, here's some pics... thanks for any suggestions!
-Kevin
[email protected]
http://www.thejet.net/viewsonic/cable_needed_1.jpg
http://www.thejet.net/viewsonic/cable_needed_2.jpg
http://www.thejet.net/viewsonic/cable_needed_3.jpg
http://www.thejet.net/viewsonic/cable_needed_4.jpg
