Maker Pro
Maker Pro

Video tracking

M

Marco Trapanese

Jan 1, 1970
0
Hello,

I know there are web cams that may track my face on its own movements. I
also know there are software to guide the telescope using a star as
reference point.

What I'd like to know is if there is a software that tracks an image
from a web cam and outputs its movements in order to control motors and
recenter the image.

Thanks
Marco / iw2nzm
 
W

Winfield

Jan 1, 1970
0
Hello,

I know there are web cams that may track my face on its own movements.
I also know there are software to guide the telescope using a star as
reference point.

What I'd like to know is if there is a software that tracks an image
from a web cam and outputs its movements in order to control motors and
recenter the image.

Thanks
Marco / iw2nzm

Yes, of course. You can write your own if you like.
We setup an motorized X-Y gantry for a webcam and
wrote software to track worms, well maggots, actually.
We illuminated them with a ring of LEDs attached to
the camera, and in early tests used red LEDs. This
didn't work because the worm would always turn away
from the light, and the camera/light would follow,
so he/she/it? ended up going around in a continuous
circle. Changing to 850nm IR LEDs fixed that problem.
 
M

Marco Trapanese

Jan 1, 1970
0
Winfield said:
Yes, of course. You can write your own if you like.


Well, please may you provide some useful links about this concept? Or
better, what should I search for? I'm not sure about the right keywords
to use.

Thanks
Marco / iw2nzm
 
W

Winfield Hill

Jan 1, 1970
0
Well, please may you provide some useful links about this concept? Or
better, what should I search for? I'm not sure about the right keywords
to use.

Thanks
Marco / iw2nzm

I can tell you for a start that we used the resources
provided by LabView.
 
M

Marco Trapanese

Jan 1, 1970
0
Winfield said:
I can tell you for a start that we used the resources
provided by LabView.


Ok, thanks.

Marco / iw2nzm
 
Top