Connect with us


Discussion in 'CAD' started by Joey-zyzmax, Sep 9, 2005.

Scroll to continue with content
  1. Joey-zyzmax

    Joey-zyzmax Guest

    Hi everyone. I find the OrCAD Capture contians a VHDL-based design
    entry. Can I use a block writed by VHDL to replace the digital
    part,when I want to realize the Mixed-signal simulation? Thanks
  2. Simple answer - no. You can go to various VHDL simulators, such as
    NC-SIM with the VHDL, but not to PSpice. I can't talk about why... :cool:

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day