Connect with us

VGA Cable Help

Discussion in 'General Electronics Discussion' started by legendaryaman, Jun 29, 2012.

Scroll to continue with content
  1. legendaryaman


    Jun 29, 2012
    Anyone knows the colour code of VGA cable....:D i want to connect the wires shown in Image 1 with wires in image 2 messed up with those colours:(..... anyone knows how to connect these 2.... first one has 8 wires and secound one has 9..??:confused:

    Attached Files:

  2. CocaCola


    Apr 7, 2012
    The only way to be sure it to continuity check each wire to it's respective pin... There is no guarantee any particular manufacture followed any set wiring standards in regards to color coding, and assuming they did could damage something...
  3. davenn

    davenn Moderator

    Sep 5, 2009
    Aint that the truth!!! about the only ones you can guarantee are the 3 for the colours, I have always seen Red, Green and Blue used. the other control / data lines can be virtually any colour

  4. legendaryaman


    Jun 29, 2012
    thanks buddy for reply :)
    i successfully maded those colour codding connections :D
    the monitor seems to working.....but 1 problem :(...that how to fix those verticle lines....monitor is fine but when i mess up with those connections the lines seems to
    change.....any1 knows how to make those connection properly so that the display becomes clear...any suggestions?
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day