Connect with us

VCR Roller Guide Issue

Discussion in 'Troubleshooting and Repair' started by ZooKeepers, Mar 26, 2020.

Scroll to continue with content
  1. ZooKeepers


    Mar 26, 2020
    Hey everyone! I have a vcr that has an issue with the roller guides. The vcr takes in the tape fine, but would not display. Having it taken apart I see that the tape is guided back by both roller guides, but as it starts moving, the tape slips over the top of the right roller pin. It then continues spinning but only by the left roller guide. Any advice on adjusting this to prevent the issue. I have a video of this, but am unable to post. I can try to take some pictures if that helps. Thanks!
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day