Connect with us


Discussion in 'Electronic Repair' started by Stefan Toftevall, Feb 2, 2004.

Scroll to continue with content
  1. Hi again,
    This is an old repair which we didn't succeed very well to repair.
    Well, the machine contained several problems and we solved all but
    And that is, during FF and REW, the tape speed will reduce greatly
    when the tape comes near the ends. At some point, it will actually
    stop. We replaced the normal stuff like belts, clutchunit, but without
    success. Could the capstan motor be bad, or is this actually caused by
    dried up electrolytes in the power supply?
    All other functions performs well.
    I would be nice to solve this problem finally...

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day