Connect with us

Valve holders ...

Discussion in 'Electronic Repair' started by Arfa Daily, Feb 28, 2007.

Scroll to continue with content
  1. Arfa Daily

    Arfa Daily Guest

    Anyone know of a source of B9A skirted / shielded chassis mount valve
    holders in the UK ? Need about 5 or so. Could get away with a couple at a
    pinch.

    Arfa
     
  2. Baron

    Baron Guest

    Arfa Daily inscribed thus:
    I might have some old kit that you can salvage !
     
  3. Arfa Daily

    Arfa Daily Guest

    Thanks for the offer Baron. I think that I have found a source of supply now
    for new ones via Don Pearce who replied over on uk.rec.audio. He pointed me
    to a place where you can put together pretty much whatever variety of base
    you need, so I can get a tagged base and marry it up with a skirted mount,
    and then add a screening can. Very reasonable prices too. Thanks again for
    making the effort to reply. Appreciated.

    Arfa
     
  4. N Cook

    N Cook Guest

    http://www.valves.uk.com/
    on the IOW, used to have a range, don't know about now
     
  5. Arfa Daily

    Arfa Daily Guest

    That was one of the places that I came across when Googling for this, but
    they don't seem to have an on-line catalogue. Thanks anyway.

    Arfa
     
  6. N Cook

    N Cook Guest

    a one man band

    from his april 2006 paper cat
    skirted B9A 1gbp each , 4gbp minimum postage
     
  7. Meat Plow

    Meat Plow Guest

    Seems to me I've purchased these from a Fender dealer along with some
    replacement jaws for 6L6 tubes many moons ago.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-