Connect with us

V500 Canon Camcorder - neither drum nor capstan spin up

Discussion in 'Electronic Repair' started by [email protected], Nov 10, 2008.

Scroll to continue with content
  1. Guest

    Problem is related to the lack of power from the dc-dc converter. CAPS
    checked against ESR and replaced accordingly. No result.
    The dc-dc converter 5,1v and 3,1v voltages are ok.
    The tl1466i output for drum and capstan are instead stuck at high
    level so no output power is provided out of the buck. No Short Circuit
    or Over Voltage protection pins measure high.
    Does any Canon guru out there know about a well known problem related
    to this?
    Thanks!
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-