Connect with us

V and I not in phase at resonance Frequency in RLC network?

Discussion in 'Electronic Basics' started by Diego Stutzer, Oct 14, 2003.

Scroll to continue with content
  1. Hi
    I try to simulate a serial RLC-Circuit driven by a ACV-Source with
    PSpice A/D (by Cadence, schematic input with Schematics).
    At resonance frequency 1/sqrt(L*C) the input current and the input
    voltage should be in phase as far as I know.
    But they aren't.
    Thanks to anyone reading this, and especially to those who reply.
    D. Stutzer
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day