Connect with us

Using an old LCD (PW070XU3) from my MATSUI PL607 portable DVD player

Discussion in 'Datasheets, Manuals and Component Identification' started by cainy393, Jan 10, 2013.

Scroll to continue with content
  1. cainy393

    cainy393

    4
    0
    Jan 10, 2013
    I've been tinkering a lot with my raspberry pi recently and I thought I maight be able to salvage the 7" LCD from my old dvd player to connect up to it. I hoped to find a simple connection that I could hook up to the composite video output on my pi but this was not the case.
    The LCD takes a TFT Specific Analogue RGB signal according to this site that sells it: http://www.panelook.com/PW070XU3_E Ink_7.0_LCM_parameter_7010.html
    Is there anyway I can hook this ting up to the composite, HDMI, or even the GPIO pins on my pi?
    I've got some pictures below. I believe the white and pink wires are for back light control and the ribbon for the analogue video signal.
    [​IMG]
    [​IMG]
     
    Last edited: Jan 10, 2013
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,497
    2,839
    Jan 21, 2010
    There's no need to open multiple threads.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-