Connect with us

Using a momentary switch to toggle audio signals

Discussion in 'Audio' started by OmarZRG, Oct 5, 2014.

Scroll to continue with content
  1. OmarZRG

    OmarZRG

    2
    0
    Oct 5, 2014
    Hi guys, I'm working on modifying my Allen & Heath Xone:22 DJ mixer and I would like to replace three of the pushbutton toggle switches with arcade buttons. Obviously, I need to build circuits to latch the arcade buttons in the same states as the toggle switches would. There are two DPDT switches and one 4PDT. The problem is, the switches appear to be carrying audio signals and I don't know how a flip flop would work in that case. How do I build a circuit (accounting for switch bounce) that will act as latches for 2-4 analog signals? Will flip flops work? Please and thank you for pointing me in the right direction.
     
  2. Gryd3

    Gryd3

    4,098
    875
    Jun 25, 2014
  3. OmarZRG

    OmarZRG

    2
    0
    Oct 5, 2014
    Thanks. And yes, I should have mentioned it shouldn't be output level since the switches deal with routing and effects.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-