Connect with us

Use CCD from old Handycam

Discussion in 'Electronic Repair' started by Peter Scholl, Apr 27, 2006.

Scroll to continue with content
  1. Peter Scholl

    Peter Scholl Guest

    Hi,
    I have the CCD board including lens and motors from an old Sony
    CCD-F350E Video 8 Handycam.
    This may be a dumb question, but is it possible to use the composite
    signal from this board. If yes, what voltage does the board require
    and where do I make the connection. I am not interested in the zoom
    and autofocus parts, only the composite output.
    The board is marked CD-40P and has two cables with 13 and 15
    connectors plus one schielded cable which I hope is the composite
    signal.
    Any help would be much appreciated.
    Peter
     
  2. n cook

    n cook Guest

    o/p is 2 pin W602

    15 pin W601
    pin 11, 5V
    10, 32V
    9, 15V
    4, Gnd
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-