Connect with us

USB to Webcam connections

Discussion in 'General Electronics Discussion' started by umair.choudhry8, Oct 17, 2012.

  1. umair.choudhry8

    umair.choudhry8

    1
    0
    Jun 3, 2012
    hello every one
    can any one help me on the point that i have a usb web cam but unfatunately wire is broken.
    i want to fix it. there are seven wires comming out from usb to camera. how to decide which wire is to be connected on which terminal. wire colours are blue, orange, black, white, green, red and gray.......
     
  2. CocaCola

    CocaCola

    3,635
    4
    Apr 7, 2012
    A picture is worth a 1000 words, and a post like this is proof positive of that...
     
  3. donkey

    donkey

    1,286
    56
    Feb 26, 2011
    give us details on make and model might be useful too. most importantly is the pic of the circuit board and the wire that is broken
    if you think the wire is broken inside the usb cable the EASIEST way to replace it without too much hassle is cut the chord about 3/4 of the way to the USB connector hopefully the broken wire is further up. then cut open the wire to the connector and use either a multi meter or a battery and light to tell you what pin is what colour wire. then with a fresh USB cable find the pin and coloured wires again and use that to to re wire each wire 1 at a time
     
    Last edited: Oct 18, 2012
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-