Connect with us

USB to SATA bridge interface

Discussion in 'Electronic Design' started by Martin Riddle, Dec 4, 2012.

Scroll to continue with content
  1. Any recommendations for a USB to SATA bridge IC?
    I am opting to go for a TI chip TUSB9261. I need to create a bridge
    for a Slimline CD (slot), these are scarce to procure in an external
    USB drive assy. But the drives are abundant.
    if there is a pre made option that will work too. (board only).

  2. Guest

    something like these?

  3. Actually like this Startech thingy, but it is obsolete.

    I want to use it for this style drive.

    Plus I need long term availbility. Rules out patching stuff together.

  4. Guest

  5. Guest

  6. miso

    miso Guest

    No need to design anything new. There are many USB to SATA adapters
    I use a Sabrent usb to SATA for cloning, It works fine on hard drives. I
    have no first hand knowledge of how it works on a CD, though one of the
    reviewers on newegg says it will work. The last thing I'd do is roll my own interface.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day