Connect with us

USB question

Discussion in 'Misc Electronics' started by Yom, Oct 18, 2006.

Scroll to continue with content
  1. Yom

    Yom Guest

    Hi all,

    I want to control a breadboard-based circuit via USB,
    but I am wondering about the prospects for doing that.

    1. Where do I find USB devices will give me
    digital outputs, e.g. 8 lines and a few inputs?

    2. I'm using Windows, which is no RTOS.
    What kind of frequency could I achieve if,
    for instance, I controlled the USB device using
    a C++ program?

    Thanks.
     
  2. DaveM

    DaveM Guest

    http://www.labjack.com/results.php?category=2

    Labjack as the hardware and software to do all that and more...

    --
    Dave M
    MasonDG44 at comcast dot net (Just substitute the appropriate characters in the
    address)

    They call it PMS because Mad Cow Disease was already taken.
     
  3. neil

    neil Guest

    FTDI do a little module UM245R for about £11 / $20
    It has USB at one end and 8 data bits in/out at the other.
    Looks like a com port to Windows.
    hth
    Neil
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-