Connect with us

USB peripheral and Implementing an RF SCI communications on a PIC

Reply to Thread

Discussion in 'Electronic Basics' started by Mourad Hadim, Jul 10, 2003.

Scroll to continue with content
  1. Jul 10, 2003 #1
    Mourad Hadim

    Mourad Hadim Guest

    Greetings,
    I have used a PIC 16C84-04/P mico-controller to built a USB
    peripheral for a remote control. The PIC is also needed for RF
    transmissions between the remode and another unit. The USB port
    seems to function but I am having problems in gettings its SCI talks
    with the RF. I would appreciate it if anybody can send me some
    insight to solve the problem.
    Thank you very much.
    Mourad
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. USB communications

  2. Miniature RF Communications Circuitry

  3. Need help implementing PI control on an Arduino UNO

  4. SCI Address Question

  5. PIC10F200 and I2C communications?

  6. Serial communications resource for PIC in C

  7. AK8963 Compass peripheral on 18F4620 intermittent error?

  8. Communications Failure

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-