Connect with us

USB interface to CCD Chip?

Discussion in 'Misc Electronics' started by Owen Ransen, Jun 6, 2006.

Scroll to continue with content
  1. Owen Ransen

    Owen Ransen Guest

    Is there a chip or circuit design or something which would
    allow me to connect a USB interface to a linear CCD chip.

    Yes, I'm still trying to work out the best way to build a
    cheap (non astronomical) spectroscope...


    http://www.ransen.com/
     
  2. Why not just use a difraction grating and a web cam? All the interfacing
    and hard parts are done for you.
     
  3. Owen Ransen

    Owen Ransen Guest

    Yes, I think you have a good point there, thanks.


    http://www.ransen.com/
     
  4. Zak

    Zak Guest

    You could use a flatbed scanner too. These calibrate at start and end of
    scan against black and white strips; this would likely need to be emulated.


    Thomas
     
  5. Owen Ransen

    Owen Ransen Guest

    Thanks for the idea, but a scanner is too big for my application.

    http://www.ransen.com/
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-