Connect with us

USB C charger with audio output design

Discussion in 'Power Electronics' started by MarkOrkenyi, Apr 13, 2018.

  1. MarkOrkenyi

    MarkOrkenyi

    1
    0
    Apr 13, 2018
    Hello!
    I'm new to electronics, so please bear with me :)
    I have designed a usb charger before, but now i have a type C usb phone, which i want to both charge and use it's audio output at the same time. It would be in a car, but the power regulation part is not a problem, the usb c power delivery is what gets me.
    My "plan" is to use only a single usb c to usb c cable into a pcb, which can charge the phone and also has a 3.5mm audio female jack. Can this be done? What controllers do i need for this? Is it possible to charge with >1.5A in this way, or only with 500mAh?
    I'm kind of lost in this type c world right now, for simple usb chargers i used a 5V3A dc buck-boost with an usb host controller on d+ and d-, but this seems to be more complex :)
    Any help is appreciated, thanks in advance! :)
     
  2. JWHassler

    JWHassler

    77
    16
    Dec 22, 2014
    Here is a starting point
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-