Connect with us

USB 2.0 COMMON MODE CHOKE TEST

Reply to Thread

Discussion in 'General Electronics Discussion' started by jmag7979, Sep 21, 2011.

Scroll to continue with content
  1. Sep 21, 2011 #1
    jmag7979

    jmag7979

    1
    0
    Sep 21, 2011
    Hi,

    first post:)

    I am at uni and have been asked to test the below component.

    USB 2.0 Common Mode Choke 1206
    Coil Craft.
    1206USB-102MLC. .

    The uni has loads of equipment to test this so hopefully they will have the stuff for me to do this, just unsure how to go about testing it.
    Its more a less a full functional test of the component to determine if they are OK and if any are fails.

    Tests that I will need to try and do are Impedence and attenuation tests.

    Any help much appreciated. THANKS
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Common mode choke polarity

  2. Common mode choke parameters and split termination concept

  3. Common mode noise ??

  4. Common Mode Noise Filter Question

  5. Common mode input range..opamp

  6. power choke?

  7. AC Choke question

  8. Transformer? Choke? What?

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-