Connect with us

Urgently need a Bias Tee

Discussion in 'Electronic Basics' started by Alessandro Esposito, Aug 19, 2003.

Scroll to continue with content
  1. Hi,
    I was going to start an our system and I realized I need a Bias Tee more
    and I prefer to not wait for the 4-7 weeks for the delivery!!!! that a
    reseller proposed.
    So I think Bias Tees are difficult to build only for broad band application.
    unfortunately are some years I don't study/make electronics and I don't have
    here books... so I'd be glad if someone could give me the formulas to let me
    configure a Bias Tee.


    DC [email protected]+
    AC ------||--+-------- AC+DC
    GND -------------------


    DC-AC-GND are clear... @ is an inductance L and || a capacitor C.
    At the moment I use a RF signal between 1 and 100MHz, a DC of 0-10V on a
    350mA. I need the Bias Tee to mix and unmix the DC-AC so I don't just need a
    DC block.
    If you can give me the formula or some direct reference to some web or book
    resources I'd be very glad so I could dimension my BiasTee also if I decide
    to work in another frequency region.

    Last things.... which parameters let me to distort less then I can my AC
    signal (usually it is a sinewave but sometimes also a square one).
    Thanks!!!!!!
    Alessandro
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-