Connect with us

Urgent need help

Discussion in 'Electronic Basics' started by Jacky Luk, Dec 18, 2004.

Scroll to continue with content
  1. Jacky Luk

    Jacky Luk Guest

    Sorry for cross posting but I need instant response.
    My assignment is due this wednesday and wondering someone would help. In
    PSpice, I need to setup a 1MHz Digital Clock, I used DSTM modules, I need
    some delay time and also initial values of the clock, the only thing I
    couldn't find is the frequency. Could anyone shed some lights on this? can i
    generate the clock using on/off time? Thanks
    Jack
     
  2. Leon Heller

    Leon Heller Guest

    I thought that was the usual way to do it. The SPICE I use has a pulse
    generator with separate high and low times.

    Leon
     
  3. Robert Baer

    Robert Baer Guest

    Perhaps you are not cognizant of the reasons for homework.
    One of the major reasons is to *learn* by *doing*.
    Need any more light bulbs?
     
  4. Jim Thompson

    Jim Thompson Guest

    You're using the wrong digital part... use DigClock. If you use
    STIM1, you'll have to itemize *every* transition.

    ...Jim Thompson
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-