Connect with us

UPS - mains voltage / output voltage not synchronized

Reply to Thread

Discussion in 'Troubleshooting and Repair' started by Pascalou, Jun 27, 2017.

Scroll to continue with content
  1. Jun 27, 2017 #1
    Pascalou

    Pascalou

    1
    0
    Jun 27, 2017
    Hello everyone,

    I hope I write in the right place of the site. My question is about an UPS (Uninterruptible Power Systems) Claude Lyons. An indicator has started to flash, it indicates that "the UPS is operating from the mains, but the output voltage is not synchronized with the main voltage".

    I would like to know if someone knows this system? And is there a way to synnchronize these two voltages or if it doesn´t
    matter to work in this condotion.

    Thanks by advance.

    Pascal.
     
  2. Jun 27, 2017 #2
    davenn

    davenn Moderator

    13,765
    1,920
    Sep 5, 2009
    not off hand .... do you have a model ?

    I cant see why it would matter .... as far as I'm aware, synchronisation is only needed when bringing 2 AC voltages together
    a particular example would be synch'ing generators in a power station
     
  3. Jun 28, 2017 #3
    ramussons

    ramussons

    374
    71
    Jun 10, 2014
    If yours is an "Online" UPS, its output voltage and frequency is not dependent on the Input. It will have it's own Frequency and Output Voltage, both which can be set.

    But, as mentioned in the earlier post, the make and Model Number will be helpful in getting better information.
     
    davenn likes this.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. UPS

  2. Philips shaver HS990 now not charging on mains

  3. UPS

  4. defective UPS

  5. FAULTY UPS

  6. UPS Failure

  7. UPS Repair

  8. Fixing a UPS

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-