B
Brad
- Jan 1, 1970
- 0
Hi,
I replaced the module and that fixed the problem. If the module was a
plug in, I would have tried replacing TA8776N instead, but I was afraid of
unsoldering the module too many times which will loosen the solder lands for
the pins.
Brad
Original post:
I replaced the module and that fixed the problem. If the module was a
plug in, I would have tried replacing TA8776N instead, but I was afraid of
unsoldering the module too many times which will loosen the solder lands for
the pins.
Brad
Original post: