Connect with us

Unindentify optocouple

Discussion in 'Electronic Basics' started by [email protected], Feb 22, 2007.

Scroll to continue with content
  1. Guest

    I need to replace some optocouple ( round shape plastic casing ). The
    optocouple which trigger a triac and control by a TTL IC, there are
    printing on the optocouple "MOD 725", i had desolder some good
    optocouple and measure both side with two output lead, the DMM show
    infinity in resistance,i could not figure out what kind of optocouple
    or any substitute on this type of optocouple.
    Dear members, can you give me advice on this question. Thanks and
    appreciate your help.
    Regards
     
  2. Phil Allison

    Phil Allison Guest

    ** Groper Alert !

    ** Err - so this thing is how old ??

    30 or 40 years ?


    ** Probably long obsolete.

    The MOC3021 is the go.

    Its only 25 years old.



    ........ Phil
     
  3. Guest

    Hi Phil,Thanks for your help, I think about 35 years, I will try your
    suggestion on MOC3021.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-