Maker Pro
Maker Pro

Unidentified high current component help!

Scook

Oct 13, 2012
12
Joined
Oct 13, 2012
Messages
12
I disassembled an inoperable 20-25 year old plasma cutter I acquired and salvaged pretty much every component (lotsss of goodies!).
I came across this component which I assumed to be an IGBT, but after searching online all I found was German datasheets of which most contained the Deutsche word luftschutz (the German ww2 helmet...lol?).
if anyone could identify this component I would greatly appreciate it!

It's roughly the size of the entire palm of your hand.
It has what appears to be 4 inputs and 4 outputs on the top
2 smaller inputs that are green and labeled "24V 60Hz" (maybe that's the gate?)

-Steve
 

Attachments

  • 1012122244.jpg
    1012122244.jpg
    130.3 KB · Views: 137
  • 1012122242a.jpg
    1012122242a.jpg
    132.5 KB · Views: 171
Last edited:

Scook

Oct 13, 2012
12
Joined
Oct 13, 2012
Messages
12
Ok that makes sense, thanks alot cola!
Real neat operating component.
Maybe i'll make a big ass coil gun and use this as a switch :cool:
 
Top