Understanding diode markings

[pittyshrew]

Hi,

I have a diode and need to obtain a part number. The only information I
have are some markings I took off with a magnifying lens.
The symbols read
|-------------|
------------------------| JX |----------------------
| 445 |
| CXP |
|-------------|
Any directional advice would be helpful. If I could just narrow it down to
a manufacturer, I could go from there.

Thanks
-------------------------------------



##-----------------------------------------------#
Article posted with Cabling-Design.com Newsgroup Archiv
http://www.cabling-design.com/forum
no-spam read and post WWW interface to your favorite newsgroup -
sci.electronics.design - 27757 messages and counting
##-----------------------------------------------##

 

[Pooh Bear]

Hi,

I have a diode and need to obtain a part number. The only information I
have are some markings I took off with a magnifying lens.
The symbols read
|-------------|
------------------------| JX |----------------------
| 445 |
| CXP |
|-------------|
Any directional advice would be helpful. If I could just narrow it down to
a manufacturer, I could go from there.

Is that a leaded part or SMD ? There should be 'bar' printed on the device to
indicate the cathode end anyway.

The markings ring no bells with me. SMD semiconductor parts in small packages
are probably too small to get even that much on them actually and usually use
subtle markings that have no relation to the part number.


Graham