Connect with us

Unable to move/dragging pcb component in Altium Designer

Discussion in 'PCB Layout, Design and Manufacture' started by Hasan2019, Oct 5, 2021.

Scroll to continue with content
  1. Hasan2019

    Hasan2019

    20
    2
    Sep 11, 2019
    Hi,

    I am using Altium Designer 21.6.4.
    I have draw schematics, switched to pcb. Previously when I click on the schematic parts it also indicate/ highlights component in pcb. After I made some net classes I cant move parts in pcb.

    What I did from Altium Designer help link as follows,

    To have the connection lines move with the component when using Edit ► Move ► Component, as they do when just clicking and dragging the component in the PCB editor, "Comp Drag" must be set to "None". See Preferences ► PCB Editor ► General ► Other (section) ► Comp Drag set to "None". Either way, they will show on the component when things are done.

    prefarence.JPG

    Nothing happed with this setting.

    Help me please,

    Hasan
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-