Connect with us

UltraViolet Lasers

Discussion in 'Misc Electronics' started by [email protected], Dec 13, 2004.

Scroll to continue with content
  1. Guest

    I wish to conduct an scientific experiment in wich
    to send High Voltage pulses over ionized air by two
    identical UltraViolet lasers .
    I wish to use the ionizated trail produced by the lasers as
    an conductive path trough wich the pulses will be sent to the required
    target .

    Any such device on market today ?


    RHB
     
  2. Modat22

    Modat22 Guest


    Make your own. Do a search for DIY open air uv laser. Its a pretty
    simple design.
     
  3. Build your own. There's an article on the "Amateur
    Scientist" CD (Google for it).

    If you don't want to spend the money (or can't get anyone
    to give it to you for Xmas, like I finally conned my wife
    into doing for me), look at:

    http://www.technology.niagarac.on.ca/people/mcsele/lasers/LasersN2.htm

    A bit more tedious than just buying one, but you'll learn
    a whole lot.

    Mark L. Fergerson
     
  4. Guest

    Thank You , I know the site for about 4 years .

    Regarding the 1974 laser described in the Scientific American there is
    an errata concerning Safety in the following issues.

    To begin, see the [2] Scientific American Article in the June 1974
    edition in the Amateur Scientist column which describes an easily
    constructed laser of this type. This article is also contained on the
    CD compilation available from the Tinker's Guild (see the Links page of
    this site). This is required reading before attempting to construct
    such a laser.

    Thank You again

    LS
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-