Connect with us

ultrasound transducer interface circuit

Discussion in 'General Electronics' started by ma, Jan 10, 2006.

Scroll to continue with content
  1. ma

    ma Guest

    Hello,

    I am wondering how ultrasound transducers are interfaced to electronic
    circuit in a ultrasound imaging system. Where can I find more information on
    this subject? Is there any off the shelf component for this task?



    Any information is very appreciated.



    Best regards
     
  2. Joerg

    Joerg Guest

    Hello ma,

    It would be nice to know your real name ;-)
    I don't know if there is much published about it. I have designed quite
    a few medical imager front-ends but when I began 20 years ago there was
    nothing in literature that I could find. I was fortunate in that there
    was an engineer who taught me the ropes.

    Basically you have to become familiar with the concept of the T/R
    switch, pulsers and pre-amps with a huge dynamic range, or at least with
    a fast and graceful overload recovery. A good place to start is the
    AD603. Not cheap but good.

    Regards, Joerg
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-